All access to, and any use of, the Training Tracker is governed by the below disclaimers and limits on use.

The content of this database tracks courses taken through the TTF and safety and craft skills training courses offered by Locals and their TTF signatory employers by collecting course sign-in sheets and uploading that information to the database. The Training Tracker is maintained and monitored by TTF staff.

While every attempt is made to ensure that information found in this database is accurate and up to date, the information is subject to change and all information included is subject to the accuracy and completeness of the information provided for entry to the TTF. The IATSE Training Trust Fund will not be held liable for information found in this database and reserves the right to determine the basis of inclusion for training records submitted to the TTF and to alter the content of the database at any time.

Please note that the Training Tracker may not contain training records for courses and certifications not submitted to us and/or taken outside of TTF or IATSE Local or signatory employer offerings. We encourage you to double-check the information obtained through the Training Tracker.

Disclaimer of Liability
Neither the TTF nor its contributors shall be held liable for any improper or incorrect use of the information described and/or contained herein and the TTF assumes no responsibility for anyone's use of the information. In no event shall the TTF or its contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages however caused and on any theory of liability, whether in contract, strict liability, tort (including negligence or otherwise), or any other theory arising in any way out of the use of this system, even if advised of the possibility of such damage. This disclaimer of liability applies to any damages or injury, whether based on alleged breach of contract, tortious behavior, negligence or any other cause of action, including but not limited to damages or injuries caused by any failure of performance, error, omission, interruption, deletion, defect, delay in operation or transmission, computer virus, communication line failure, and/or theft, destruction or unauthorized access to, alteration of, or use of any record.

Disclaimer of Warranties/Accuracy and Use of Data
Although the data found using the TTF Training Tracker database have been produced and processed from sources believed to be reliable, no warranty expressed or implied is made regarding accuracy, adequacy, completeness, legality, reliability or usefulness of any information. This disclaimer applies to both isolated and aggregate uses of the information. The TTF provides this information on an "AS IS" basis. All warranties of any kind, express or implied, including but not limited to the IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, freedom from contamination by computer viruses and non-infringement of proprietary rights ARE DISCLAIMED. Changes may be periodically added to the information herein; these changes may or may not be incorporated in any new version of the publication. If the user finds any errors or omissions, we encourage the user to report them to us at tracking@iatsetrainingtrust.org.

This course provides a general introduction to the world of workplace health and safety. It explains why worker health and safety is important, why injuries and illnesses occur in the workplace, effective injury and illness prevention programs, methods of hazard identification and control, and strategies to promote health and safety.

This course is for anyone whose work may involve potential exposure to diseases carried by blood or other bodily materials. It includes topics that cover transmission pathways, work practice controls, hazard communication, emergency reporting and response, and post-exposure follow-up.

This course explains what defines a chemical as hazardous to health and safety, what makes a toxic chemical more likely to cause harm to human health, how toxic chemicals affect the body, characteristics of a chemical that can make it hazardous to human health and safety, basic concepts of hazard communications, ventilation, and worker right to information. This module also reviews Global Harmonization Systems.

This course builds on hazard communication and addresses the hierarchy of controls to protect the body from chemical exposure. Topics covered include routes of exposure to chemicals, strategies to reduce chemical exposure, hierarchy of controls, and personal protective equipment.

This course covers basic electrical safety. Topics include, but are not limited to, recognition and mitigation of electrical hazards, cable protection, electrical safety devices, distribution equipment, and grounding.

This course provides an overview of the safe practices pertaining to fall prevention and fall protection while working on the ground or at heights. Topics covered include housekeeping, slips and trips, the hierarchy of controls, ladder safety, travel restraint and fall arrest systems, as well as specifics related to elevated work platforms, rigging, and scaffold safety.

This course covers mobile elevating work platform safety and use. Topics covered include types of MEWPs, loads, inspections, fall hazards, and electrical hazards.

This course provides an overview of the use of scaffolds in a trade context. Topics include types of scaffolds, scaffold hazards and controls, and fall protection.

This course explains the causes of musculoskeletal injuries (MSIs), the basics of body mechanics, primary and secondary risk factors to MSIs, control of ergonomic risk factors, and elements of ergonomic hazard analyses. 

This course explains the effects and controls of noise exposure. It explains basic ear anatomy, the components that make up sound, hearing disorders, noise controls, and elements of an effective hearing conservation program.

This course describes safe practices while working in confined or small spaces. Topics covered include legal definitions of confined spaces as compared with small spaces, physical and atmospheric hazards, physical and atmospheric controls, elements of an effective confined space entry program, and rescue plans.

This course covers inspection, safe handling, and precautions to be taken when working with or around firearms.

This course explains the inspection, care, and maintenance of equipment, as well as electrical hazards and important operational safety precautions for this equipment. 

This course gives an overview of compressed gas/fuel cylinders. Topics include filling various types of cylinders, an overview of potential dangers, and general safety procedures applicable to working with compressed gas/fuel cylinders.

This course provides an overview of terminology and safe practices as they pertain to the methodology and materials used for rigging in the entertainment industry.

This course covers the use of welding and cutting equipment. Topics include the proper selection, use, inspection, and care of equipment.

This course was designed to identify, give basic information, and share resources on hazards found in work environments. The main course presents an overview of situation awareness strategies and how they can be used to identify hazards. Once the main course is completed, users can choose from 40 mini-courses on numerous workplace hazards that allow participants to customize the learning experience to their needs.

The purpose of this course is to increase awareness of pandemic safety in the workplace by describing what pandemics are and how to prevent exposure to infectious agents on the job. Topics include how pathogens, like viruses and bacteria, spread diseases from person to person and the different types of pandemic illnesses. The course is intended for all IATSE workers in all crafts.

This course is intended to help artists and stylists learn how to implement sanitation best practices into their daily process to ensure the health and safety of themselves and the performers they work with. Artists and stylists will learn about common infectious agents often encountered in the workplace and how to properly sanitize, disinfect, and sterilize their tools, products, and specialty items while working in the trailer, background processing, on set, and in the theater.

This awareness course provides workers with information regarding craft-specific safety and health hazards that may occur in the workplace. Topics include ergonomics, fall prevention, small space awareness, electrical safety, chemical protection, safe sanitation and laundry practices, and more.

This foundational course introduces main principles of adult learning and effective facilitation techniques, guiding trainers through the development of adaptive lesson plans and active learning environments. It sets the stage for understanding classroom dynamics, student assessment, and the continuous improvement of teaching practices, both in structured settings and real-time, hands-on environments, forming the cornerstone of the Train the Trainer program.

Adult Education Theory provides a deeper look into the principles of adult learning and the distinctions between andragogy and pedagogy. This course will equip trainers with the skills to apply the Learning Cycle in instructional design, adapt lessons to diverse learner preferences, and create an inclusive learning environment, reinforcing the core concepts necessary for effective adult education across various training contexts.

Course Preparation will emphasize the importance of thorough preparation in training delivery. It will guide trainers on how to effectively navigate instructor guides, manage technical equipment, organize resources, and ensure compliance with course administration requirements.

Presentation and Delivery Techniques will focus on developing the skills necessary for clear and engaging communication during training sessions. Trainers will learn to enhance their presentation techniques, manage group dynamics, and handle challenging participants with confidence, ensuring that a trainer can deliver content effectively and maintain an engaging learning environment in both formal and hands-on instructional settings.

Creating Assessments focuses on the evaluation and improvement of the training process by designing, administering, and analyzing assessments. Trainers will learn to create assessments that align with course objectives, develop clear and effective assessment questions, and use rubrics for performance evaluations. Additionally, the course covers interpreting assessment results to inform instruction and ensuring continuous improvement in training methods, whether assessing knowledge in the classroom or skills in hands-on environments. The course also incorporates the Kirkpatrick Model to measure the broader impact of training on behavior and organizational outcomes.

Adapting Pre-Developed Content will emphasize flexibility and adaptation during training sessions. Using the foundational knowledge and skills learned in earlier Train the Trainer courses, trainers will learn to adjust content delivery in real time based on participant feedback to suit different audiences and learning environments.

This course on Customer Service for the Live Events Industry is designed to equip professionals with the essential skills needed to maintain professionalism and build strong client relationships. The course covers key areas such as communication strategies, emotional regulation, handling challenging situations, cultural awareness, and time management. Participants will gain practical techniques for navigating client interactions, managing unexpected changes, and fostering professionalism in all aspects of their work.

This course on Professional Etiquette is designed to equip IATSE workers in the Entertainment Industry with the key skills and behaviors necessary to maintain professionalism across a variety of high-pressure environments. Whether working in Film & TV, Live Events & Stage Craft, Convention & Tradeshow, or Sports Broadcast, professionalism is the cornerstone of success.

This course focuses on essential principles such as punctuality, communication, workplace conduct, and safety protocols. Learners will gain an understanding of how professionalism impacts both short-term project outcomes and long-term career success. The course also provides practical advice, best practices, and insights that will help individuals navigate workplace challenges with confidence and professionalism.